Under Table Storage

Use this forum for general web site questions and comments
Post Reply
MarkVa1
Posts: 180
Joined: Mon Aug 04, 2014 12:56 pm

Under Table Storage

Post by MarkVa1 »

I've built the bigger 50x100 wood stand for the KRMX02 and currently have a bunch of plywood and scrap underneath the bed. I'd like to have something more substantial, maybe even something that slides out for storage? Anyone using the space under the CNC for storage in a cleaver way - or useful way? Maybe something specific to the wood stand design?

Thanks.
baysale976
Posts: 479
Joined: Mon Dec 31, 2012 11:07 am

Re: Under Table Storage

Post by baysale976 »

Due to plywood plates used to keep the metal stand I made stable, there is only about 10" open height beneath the front of my 27 x 50. I built flat 'carts' on wheels that slide in and out from under there and can hold many things, as long as they fit between the table legs (just over 2 ft). On one I have spoiler boards, on the other I have smaller bits of material. Cross pieces hold stuff off the floor.

A picture is worth 786 words:
IMG_2787 (002).jpg
Post Reply