General
Please note that the forums are not meant as a sound off stage. Their sole purpose it to aid individuals in the building of the projects on this web site.
I reserve the right to delete, modify, and move the messages in this form to ensure that there are no unnecessary distractions.
If I do edit, move, or delete your post, just keep in mind that I see things from a very different angle. It’s often just to keep from throwing a wrench into the works and confusing other readers.
Book Designs
These forums were put in place to discuss the construction of the KRMxxx machines as they are presented in my books. Any post that deviates from these designs will be, at the very least moved to the advanced topic area, or in some cases removed altogether.
Competing designs
Any post that deals with competing designs in any detail will not be tolerated. This includes upgrades and items that are sold by Kronos Robotics. If you design an alternate upgrade to one that is presented in one of my books, or that is sold on the Kronos Robotics web site, please post it in another forum such as the CNCZone.
Moderation of the forums !!!Please Read!!!
Use this forum for general web site questions and comments
Jump to
- Web Site
- ↳ General
- ↳ Forum Registration
- ↳ General CNC
- ↳ Swap Meet
- KRMx02 CNC Workbook Forums
- ↳ KRMx02 CNC
- ↳ KRMx02 Book updates
- ↳ KRMx02 Upgrades
- ↳ KRMx02 Construction
- ↳ KRMx02 50 x 50 Build
- ↳ KRMx02 50 x 102 Build
- ↳ KRMx02 18 x 14 Build
- ↳ KRMx02 30 x 27 Build
- ↳ KRMx02 Advanced Topics
- ↳ KRMx02 Operation
- Upgrading the KRMx02 Workbook Forums
- ↳ Dragon Cable Upgrade
- ↳ Emergency Stop
- ↳ Gantry Brace
- ↳ Homing Switches
- ↳ Depth Probe
- ↳ Xbox 360 Controller
- ↳ Router Control
- CNC Construction Set
- ↳ CNC Construction Set General
- ↳ CNC Construction Set Volume 1
- ↳ CNC Construction Set Volume 2
- ↳ CNC Construction Set Volume 3
- ↳ CNC Construction Set Volume 3B
- ↳ CNC Construction Set Volume 5
- ↳ CNC Construction Set Build Blog
- ↳ CNC Construction Set Volume 5B
- ↳ CNC Construction Set Volume 6
- CAD / CAM / Control
- ↳ General CAD/CAM/Control
- ↳ Mach 3
- ↳ Cut2D and VCarve Pro
- ↳ Cut3D
- ↳ SheetCam
- ↳ Fusion 360
- KRmf70 Forums
- ↳ Building the KRmf70
- ↳ Upgrading the KRmf70
- Other CNC Stuff
- ↳ Build Your Own DIY CNC PC
- ↳ Hans Gear Clock CNC Edition
- KRmc01 CNC Mill Workbook Forums
- ↳ KRmc01 CNC Mill
- ↳ KRmc01 Construction
- ↳ KRmc01 Operation
- MySlovenianHive Forums
- ↳ MySlovenianHive General
- ↳ MySlovenianHive Volume 1
- ↳ MySlovenianHive Volume 2
- ↳ MySlovenianHive Volume 3
- ↳ MySlovenianHive Volume 4
- ↳ MySlovenianHive Volume 5