CNC Upgrade Order
Posted: Tue Jun 05, 2012 1:26 pm
Now that we have several upgrade projects on the web site, I thought that I would list the recommended order for installing the upgrades.
#1, Your CNC, obviously
#2, Dragon Cable
#3, Estop
#4, Gantry Braces or Brackets
#5, Homing Switches
#6, Dust Collection (Air Exchanger and Dust Shrouds)
#7, Xbox 360 Controller
#8, Probe
These are the major upgrades there are others that you can add, but these should be at the top of your list. Note that #2-#4 can be swapped around if you like. Also #6 and #7 can be swapped as well.
#1, Your CNC, obviously
#2, Dragon Cable
#3, Estop
#4, Gantry Braces or Brackets
#5, Homing Switches
#6, Dust Collection (Air Exchanger and Dust Shrouds)
#7, Xbox 360 Controller
#8, Probe
These are the major upgrades there are others that you can add, but these should be at the top of your list. Note that #2-#4 can be swapped around if you like. Also #6 and #7 can be swapped as well.