Page 1 of 1

Drag Knife Section

Posted: Tue Nov 26, 2019 5:23 pm
by msimpson
I started a new area on the web site where I show how I setup and use a series of drag knives.
https://www.kronosrobotics.com/using-a-dragknife

Re: Drag Knife Section

Posted: Wed Nov 27, 2019 6:38 pm
by mbonadio
Very nice write up with heaps of information to digest. This is on my bucket list to start experimenting with, I have plans to make the box knife drag knife first, then start experimenting.

Cheers
Michael

Re: Drag Knife Section

Posted: Thu Nov 28, 2019 12:28 am
by msimpson
The box knife is a little more difficult to get things correct because of the large offset. I recommend starting with the smaller roland knife.

I'm just finishing up a couple new tool holders one for the roland style and the other for the box knife. I will be mounting each on its own Quick Change Z Plate.