Drag Knife Section

Post Reply
msimpson
Site Admin
Posts: 3010
Joined: Tue Mar 30, 2004 6:19 pm

Drag Knife Section

Post by msimpson » Tue Nov 26, 2019 5:23 pm

I started a new area on the web site where I show how I setup and use a series of drag knives.
https://www.kronosrobotics.com/using-a-dragknife

mbonadio
Posts: 180
Joined: Wed Dec 05, 2012 3:01 am

Re: Drag Knife Section

Post by mbonadio » Wed Nov 27, 2019 6:38 pm

Very nice write up with heaps of information to digest. This is on my bucket list to start experimenting with, I have plans to make the box knife drag knife first, then start experimenting.

Cheers
Michael

msimpson
Site Admin
Posts: 3010
Joined: Tue Mar 30, 2004 6:19 pm

Re: Drag Knife Section

Post by msimpson » Thu Nov 28, 2019 12:28 am

The box knife is a little more difficult to get things correct because of the large offset. I recommend starting with the smaller roland knife.

I'm just finishing up a couple new tool holders one for the roland style and the other for the box knife. I will be mounting each on its own Quick Change Z Plate.

Post Reply